MINIMUM REQUIREMENTS FOR ENGINE OF INCINERATION
The incinerator with pyrolytic combustion should have:
a. Combustor:
– Chamber strong steel support legs sheet;
– Thickness: 80 mm
GENERAL SPECIFICATIONS:
The incinerator for medical waste must be designated for the destruction of all kinds of waste made by the Center for Health (waste type hospital, clinic, medical laboratory for damaging capacity of 30kg / h).
Pyrolytic gasification combustion control shall:
? Avoid growth of black smoke and dust formation tine loading of waste;
Chimney Height: 5m, Diameter: 280mm
POWER BURNER
? Provide regular and complete combustion of the waste;
0.11 KW0
Fan power 0.37 kW
b. Post – combustion chamber:
– Treat the gas has a minimum temperature of 1100 ° C with a minimum residence time of 2 seconds the afterburner is to;
– Automatic monobloc burner and flame plunge equipped with an electronic ignition system and permanent ventilation.
? 1 for controlling the temperature of the afterburner
– The afterburner is lined with high thermal insulation with a thickness of 150 mm
c. Cabinet, control and regulation:
* Refractory:
Combustion
Operation 12h/24, 6d / 7
Post combustion: 0.2m3
900 ° C
Mixed combustion chamber: 0.3m3
– The recovery operation of the ashes will take place once a day line before beginning the day’s operation.
Composition of the refractory liner:
– The afterburner is equipped with access doors so as to ensure regular cleaning of dust;
– The Whole installation will conform to European standards (EU)
. Combustion
– The liner is made of refractory bricks and a thermal insulating material ensuring a minimum temperature of the sheet;
. Afterburner
– Thickness: 110mm
Burner combustion:
– The combustion chamber is equipped with a burner to line to guarantee correct temperature for the total destruction of waste combustion;
– Nature: Refractory bricks with 42 alumina
Air fan:
? 1 to regulate the temperature of the combustion chamber
Fuel diesel oil
– Operating temperature: 1650 ° C maximum
Afterburner
0.11 KW
1100 ° C
– There is a motor operated valve which controls the flow according to the combustion.
– Operating temperature: 1000 ° C maximum
– Regulators of fever with digital display:
* Insulation:
? The manual controls are provided on each item.
2.
– The electric power is 220V 50Hz single phase.
– Nature: Calcium Silicate
– The dimensions of the floor are equipped laterally primary air nozzles that fuel combustion;
Volume of combustion
room Combustion: 0.3 m3
‘ TEMPERATURES:
? Provide controlled guaranteeing the absence of color, cloud of smoke or burning odor;
Fan power 0.37 kW