Ability of destruction in weight: 60 Kg/h.
The incinerator should avoid the discharge of black smoke and dust that is fine, (Smokeless) during the loadings.
It should be able to decrease the quantity of wastes by 98%.
It should be able to hold emission in the next burn with gas residence of less than two seconds.
The incineration should be completely free from visible smoke in addition to offensive odours.
The lower calorific power (L.C.P) of this waste will be 3,500 kcal/kg
The Temperatures of combustion: Minimum will be 850oC and max 1400oC
Post combustion: 1100oC.
The Inner diameter of the Chimney: Ø 400 and its elevation: 8 m
The Amount of the combustion chamber: 1.200 L
The Dimension of the door for loading in cm: 70×70.
Burner operation should be Automatic On/Off
Fuel: diesel
The supplier must provide necessary information for the best of the installment
This incinerator with”PYROLYTIC” combustion should have:
A combustion chamber of waste:
* Perfectly tight door for the manual loading of waste. The loading should be Manual, Batch Load
* A burner of light which the use is restricted to the ignition of waste.
* Frontage of loading door seals gone up on hinges, wheel of screw plug, flexible joint, and stuffing insulating from refractory.
* The insulation of the combustion chamber ought to be composed of refractory bricks, using a high content of aluminum and insulates bricks in order to guarantee a minimum temperature on the exterior sheet metal.
* Composition of the refractory;
Refractory concrete :
. Nature: 42 percent of Al203
Insulate in fibrous panels:
. Thickness: ≥75 mm
Character: Calcium silicate.
* Burner of light of waste, with fuel, standard mono-bloc casting guiding plunging flame, lighting and safety of electronic ignition, permanent ventilation, electromagnetic sluice gate of regulation and isolating valve.
* Plate of combustion in Carborundum, preventing the fixing of glass and slags.
Insulate in fibrous panels :
. Thickness: ≥75 mm
Nature: Calcium silicate.
* Burner of lighting of waste, with fuel, standard mono-bloc casting guiding plunging flame, lighting and safety of electronic ignition, permanent ventilation, electromagnetic sluice gate of regulation and isolating valve.
* Plate of combustion in Carborundum, avoiding the fixing of glass and slags.