ratio is 30-70% for the other scenarios
From the mill; it will include medicinal and also preventive upkeep, and utilizing device, etc

24.
* A heater of illumination that the use is restricted to the ignition of waste.
22. The provider must give batches of spare pieces of first urgency as well as consumable of the burner.
* Plate of combustion in Carborundum, staying free from the dealing with of glass and slags. A chamber of article burning of gases.

– – – Chemical waste solids as well as likewise liquids, waste oil and also numerous other difficult-to-handle items

The tools will absolutely be licensed for process from PME after passing website investigations.Manual tons double chamber

burner for clinical waste to melt 50kg/hr on consistent treatment, with Key temperature level roughly

800degC minimum as well as 1200degC or even extra in the excess chamber, complete with invoicing door, Ash door, Air as well as check out

vents, complementary air system with adjustable dampers, burners and heater control system and additionally ignition device, the entire to

satisfy NEMA requirements as well as other international requirements. Do you have erected shelters?Installation of waste disposal system (biomedical) 500kg capacity design, MP 500

medical burner.

* A switch breaker for every engine (ventilators and also burners).

* A switch breaker for every single engine (ventilators and also heaters).
Nature: 65% of Al203.
* Electro-ventilator distributing the second air, the plan of the air flow being implemented by valves and also

following the control of the automatic cycle.
This heater with “PYROLYTIC” burning need to have: 17.

medical waste incinerator options along with costs for 100 bed/ 500 mattress / 1000 mattress / 3000 bed health care facilities.
From the manufacturing facility; it will include medicinal as well as likewise preventative maintenance, as well as using tool, etc

CAPABILITY: Burner 150 kg/hr.

Kinds of wastes used: GENERAL WASTE.Polyester, polypropylene, polystyrene, plastic acetate plastic, synthetic

plastics,
* A timer with adjustable temporization for the law of every burner.
– – Safeguard in fibrous panel:.
Organic rubber, artificial rubber, polyurethane sheet, and also difficult films, solids as well as also
* A tool of injection of air permitting a general re-combustion of gases.
BURNER FOR SMALL ANIMALS ABOUT 70-

100 KGR/PER TIME

2.

instance the burner will be running for 10 hrs day-to-day shows the oil use will be ~ 140 Litres or also much more? Do you have really put up shelters?Installation of waste disposal system (biomedical) 500kg capacity layout, MP 500

technological burner.
* A sheath of release of these gases sweltered.
* Carcass in solid sheet steel with assistance of link.
–– – – international criteria as well as also waste manufacturings presumptions ought to use
23. Ability to treat Plastic: Not much less than 40% by weight.
The Internal size of the Smokeshaft: Ø 400 as well as its altitude: 8 m.
14. Heater procedure need to be Automatic On/Off.
* A device of air ducts of cooling of waste gases,.
* A burner of burning of gases,.
– Nature: Calcium silicate. * Heater of lights of waste, with petrol, typical mono-bloc spreading directing diving fire, lights as well as safety of

electronic ignition, irreparable air circulation, electro-magnetic sluice gateway of legislation together with dividing shutoff.{
(adsbygoogle = window.adsbygoogle || []).push({});|}
– – – – fragments that can be quickly prepared – – – Factors that conveniently deteriorate such as wood, paper, natural leather and rubbish – – – Chemical waste solids as well as also fluids, waste oil as well as additionally numerous other difficult-to-handle things

The apparatus will absolutely be certified for process from PME after passing website investigations.Manual lots double chamber

burner for scientific waste to melt 50kg/hr on consistent treatment, with Key temperature level approximately

800degC minimum as well as 1200degC and even extra in the Added chamber, full with payment door, Ash door, Air as well as check out

ports, supporting air system with adjustable dampers, burners and additionally heater control system and additionally ignition system, the entire to

satisfy NEMA needs together with numerous other international needs. Здравствуйте! Ж

ду ответа. Стоимость и доставка до г.Алматы Казахстан

The technological details we admire are:

–– – – Capacity( burning capacity of waste per human resources). 150kg/hour. Burner with 300l waste chamber

–– – – Build products, 5mm Excellent top quality light steel building; 100 mm superb quality refractory cellular lining.

–– – – High Temperature paint finish.we have 2 health facilities, even more later 20 dental specialist offices, and also over 50 physician offices.
22. Process Filtering system: Scrubber to be stated as optional.
25. The technical training of vehicle drivers will absolutely need to be offered as well as additionally provided by a specialist.
9. The incineration should be completely lacking visible smoke as well as offending smells.
* A regulatory authority with watch for the temperature of post combustion.
10.
* A regulator with digital watching for the temperature of burning.
24. The provider will implement an onsite installation of the burner.
15. Gas: diesel.
INCINERATOR, DIESEL.

Sorts of wastes being used: GENERAL WASTE.Polyester, polypropylene, polystyrene, plastic acetate plastic, synthetic

plastics,

21. The de- ashing needs to be carried out in all-time low of the burning chamber or the deashing should be Automatic or hands on

set de ashing.
23. The mounted incinerator should birth a 1 year warranty.
25. The technological training of drivers will surely must be offered and also provided by a professional.
24. The provider will conduct an onsite installment of the incinerator.
4. Design Demands: Kinds A, B, C, D, along with E of professional waste 5. ” PYROLYTIC” burning, by regulating the gasification of waste.
7. It should have the ability to lower the quantity of wastes by 98%.{
(adsbygoogle = window.adsbygoogle || []).push({});|}
* Frontage of filling with door seals climbed on joints, wheel of screw plug, adaptable joint, as well as packaging shielding

out of refractory.
– Shield in primitive panels:.
23. Discharge Specifications Conformity: BS 3316 or similar demand.
22. The carrier should provide sets of extra elements of initial necessity along with palatable of the heater.
24.
* A regulative authority with expect the temperature level of post burning.
8. It needs to be able to hold exhaust in the 2nd thaw with gas house of not less than 2 secs.
19. A control box making certain the complete cycle of burning.

20. Follower:.
* A regulator with digital watching for the temperature of burning.
13.
* Faultlessly tight door for the hand-operated loading of waste. The loading should be Guidebook, Establish loads.
* The insulation of the burning chamber should surely be comprised of refractory blocks, using a high material of aluminium

as well as also insulates bricks in order to make sure a minimum temperature level on the outdoors sheet steel.
22. Process Filtering system: Scrubber to be mentioned as optional.
* Heating system with gas, mono-bloc spreading assisting type with straight fire, lights along with safety of digital

ignition, lasting air circulation, electro-magnetic sluice entryway of principle and isolating valve.
* A second shot of air to ensure exceptional oxygen net content.
21. Controls along with programs:.

21. The de- ashing needs to be performed in lowest level of the burning chamber or the deashing need to be Automatic or hands on

established de ashing.
2. It needs to have the capability to run not much less than 10 hours/day 3. This incinerator must have the capability to wreck all flammable wastes Made by medical facilities, special facilities,

labs, institutes, and so on
6. The incinerator has to remain clear of the launching of black smoke as well as great dust, (Electric) throughout the loadings.
Would certainly it be possible to provide us information on the ability of burner we need

on this island.

–– – – Around 150 KG/Hrs. Heater to dispose our daily routine death for this size of the cattle ranch.1. Can the

100kg/hr melt powerful waste/hazardous waste like run out paints, waste oil or chemicals.
16. The supplier has to provide essential information for the greatest of the installment.|– – – Chemical waste solids as well as likewise liquids, waste oil and also numerous other difficult-to-handle items

The tools will absolutely be licensed for process from PME after passing website investigations.Manual tons double chamber

burner for clinical waste to melt 50kg/hr on consistent treatment, with Key temperature level roughly

800degC minimum as well as 1200degC or even extra in the excess chamber, complete with invoicing door, Ash door, Air as well as check out

4    Fuel    Diesel (LDOjHSD)
3.     Bum capacity    100 Kgjhr (minimum)
11.     Opening lid    Large top open归g lid (Approx. 700 mm x 500mm) for
Incinerators for conversion of waste to nice ，white sterile
Temperature monitoring and thermostatic control
Model of the incinerator.
12.     Fuel tank    100-150 L

incineration Heating system for shedding patalogical (such as human cells or blood) as west

The weight of the west products is 700 kg per month and likewise we require an isolated furnace

Without fume in addition to any sort of kind of damaging gas

. INCINERATOR REQUIREMENTS

# Recap Spec

1 Burning Capacity – – – – 400 kg/time and need to not be much less than 300 kg/time. Maximum burning time require to be 6 times/day

2 Smokeshaft outside diameter – – – – 300 to 400 mm

3 Fan power – – – Need to not exceed 1.1 kw

4 Voltage – – – – 220V

5 Oil ingestion – – – Have to not exceed 14kg/h

6 Feeding door diagonal measurement (mm) – – – – Not much less than 500mm 7 Incineration Temperature. (⁰ C) – – – – 800 or over 8 Exhaust

Carbon Monoxide – – – – Have to not exceed 100 mg/m3

SO2 – – Need to not exceed 400 mg/m3

HF – – – – (Hydrogen fluoride) Must not exceed 9.0 mg/m3

NO2 – – – – Must not go beyond 500 mg/m3

Smoke dirt – – – – Need to go beyond 100 mg/m3

9 Elevation of the Burner – – – – Very little less than 10m over ground level

10 Manufacturer’s Solution warranty – – – – Not much less than 1 year