Doubel Combustion Chamber

All Incinerators are Doubel Combustion Chamber with One Fuel Burner Each. After Burner Technology for Completely Combustion and Cleaner World.

Read More

High Temperature Incineration

Temperature Range 800 Degree to 1200 Degree in Combustion Chamber. Temperature Thermocouple Monitor and Controller. High Quality Fire Brick and Refactory Cement.

Read More

Get Lastest News

There are latest incinerator news like technical, public news, business tender for medical waste incinerator,animal incineration, pet cremation

Read More

Nanjing Clover Medical Technology Co.,Ltd.

Email: sales@clover-incinerator.com | Tel: +86-25-8461 0201

Regular model incinerator for market with burning rate from 10kgs to 500kgs per hour and we always proposal customer send us their require details, like waste material, local site fuel and power supply, incinerator operation time, etc, so we can proposal right model or custom made with different structure or dimensions.
Incinerator Model YD-100 is a middle scale incineration machine for many different usage: for a middle hospital sickbed below 500 units, for all small or big size family pets (like Alaskan Malamute Dog), for community Municipal Solid Waste Incineration, etc. The primary combustion chamber volume is 1200Liters (1.2m3) and use diesel oil or natural gas fuel burner original from Italy.

Latest Post

Burner kind of pyrolytic clinical waste burner capacity


Together with the following technical information:

1.      1 pharma solid waste incinerator unit comprising two combustion chambers and based on steel base with scrubbing

system.

2.     

3.      Capacity: Approximated 150 kg/hr. Over 10 hrs.

4.      Wastes features:

·         BULK density: 70 — 100 kg/ bm³.

·         Calorific value: 2000-3000 kcal / hr.

·         Moisture content: 20-30%by weight.

·         Ash content: 2 — 8 percent by weight.

·         Vinyl content: 15-20 percent by weight.

5.      Two combustion chambers.

6.      Operating temperatures:

·         First room: less than 700 – 800 °c.

·         Second room: less than 1200 °c (during continuous operation).

7.      The burners should be automatically switched off if any of the combustion chambers doors is open.

8.      The burners of the first and second combustion chambers are chosen for burning diesel oil (light fuel).

9.      Automatic loader and unloader to be supplied.

10.     Exhaust gases to be comply with International Environmental code and requirements.

Including:Incinerator: Construction to be specified
The mark to be given
Aspiration: natural

– A getting cage for biomedical waste;

– A combustion chamber with a chimney using a filter to retain the ashes;

Chimney section: approximately 300 cm; using a minimum height of 6 m

Door dimensions: approximately 50×60 cm


diesel oil fired medical waste incenerator


incinerator.

1/ Cost of a 200kgs/Hr medical waste heater.

Heat Waste Incinerator Layout D. MEGABYTES 750XL Melt Rate-150Kg/ hr minimal Weight( Kg) -4000 kg Added Chamber

(double room with post-burning) Gas Retention Time 2 2nd Gas Diesel Power Supply for control box 220V-240, solitary

phase 50-60Hz Minimum operating temperature level 1200 oC One year additional parts bundle for full maintainability 10m pipe

pipe. 1100 litre fuel Storage tank +pipeline system Containerised (the container will surely function as housing) Added smokeshaft development

1 metre high One (1) year guarantee.

Two-compartment heater with a capacity of 20 kg/ hour.

Burner with reduced upkeep as well as operating expense; Prepared with an automated control board as well as very simple to utilize with

electro-magnetic procuring of the doorway.

A major waste decrease chamber of 900 ° C. A post second burning chamber of gases developed in the main chamber

at the minimum 1100 ° C.

Carbon deposits in ash less than 5% by weight based on European Directive 2000/76/ EC.

With refractory mobile lining in products of better
(adsbygoogle = window.adsbygoogle || []).push({});{
(adsbygoogle = window.adsbygoogle || []).push({});|}|

Heat Waste Incinerator Layout D. MEGABYTES 750XL Melt Rate-150Kg/ hr minimal Weight( Kg) -4000 kg Added Chamber


garden incinerator


  1. c) All manuals must be in English language.

 

9)  All the equipment supplied must be supplied with user and technical manuals. Instructions on their use,

storage and service must be clearly indicated at the manuals and where necessary, on the gear.

 

10)Where applicable the following shall apply:

  1. a) Electrical Safety
  2. i) The unit should be provided with a line (power) cord of acceptable durability, quality, length, and ampacity

and should be secured with adequate strain reliefs.

  1. ii) The unit should include, or the bidder or supplier should offer, power plugs that are sufficient for the maximum

voltage and current of the device.

iii) The chassis should be grounded and grounding resistance shouldn’t exceed 0.15 ohm.

  1. iv) If the unit is double insulated, it should be so labeled.
  2. v) Electrical leakage current from the chassis of the unit should not exceed

500μA per IEC 601-1 b)  Effects of Fluids


Maker of ha zardous waste heater in china


Per your promotion for 300 kg.hr. Version– – We need to know the speed with return.

The amount of Kg. Of Gas would be needed for running this Style 10 hrs. everyday.

We have our very own Products Forwarding Agent.

We had an Agreement for Waste Keeping an eye on before their Civil Fight for 120 Tons/Day for one Town in North Africa.

Assigning door Mouth Size (mm): 760 * 760 (approx.) .

Burning Ability: 125 kg minimum/time (3-6times/ day), twin chamber, double burning system
Medical Waste Heater

Double Chamber (Key & & & & Secondary) with insulating material pieces (totally insulated internal refractory lining) in addition to

managed air blower for each room

Insulation/ Refractory Density: ≥ 100mm

Chamber plate thickness: ≥ 6mm

Fuel Kind: Gas based upon losing gas in combustion chambers

Waste Capacity: ≈ 150 Kg/Day

Incineration capability: ≈ 25 Kg/Day (Various waste invoicing in addition to waste elimination doors)

Heaters: In the very least with (02) heaters of automatic start as well as give up functions

Combustion performance: > > 97%

Temperature level: programmable temperature level with temp monitoring system

Home time: 2 second in secondary room

Home heating value: 4000 Kcal

Temperature Level Choice: ≈ minutes 800ºC to max 1200ºC

Electrical supply: 220V with solitary stage

Smokeshaft Plate Density: ≥ 5mm

Water scrubber: Rubbing using reagent like lime & & & & must constructed from SS 10 scale of non-corrosion residential properties as well as painted

exteriorly by devices quality heat repellent enamel

Chimney Elevation: in between 15-25 feet


incinerator for medical waste


MINIMUM REQUIREMENTS FOR ENGINE OF INCINERATION

The incinerator with pyrolytic combustion should have:

a. Combustor:

– Chamber strong steel support legs sheet;
– Thickness:                    80 mm
GENERAL SPECIFICATIONS:

The incinerator for medical waste must be designated for the destruction of all kinds of waste made by the Center for Health (waste type hospital, clinic, medical laboratory for damaging capacity of 30kg / h).

Pyrolytic gasification combustion control shall:

? Avoid growth of black smoke and dust formation tine loading of waste;
Chimney    Height: 5m, Diameter: 280mm
POWER BURNER
? Provide regular and complete combustion of the waste;
0.11 KW0

Fan power    0.37 kW

b. Post – combustion chamber:

– Treat the gas has a minimum temperature of 1100 ° C with a minimum residence time of 2 seconds the afterburner is to;
– Automatic monobloc burner and flame plunge equipped with an electronic ignition system and permanent ventilation.
? 1 for controlling the temperature of the afterburner
– The afterburner is lined with high thermal insulation with a thickness of 150 mm

c. Cabinet, control and regulation:
* Refractory:
Combustion
Operation    12h/24, 6d / 7

Post combustion: 0.2m3
900 ° C
Mixed combustion chamber: 0.3m3
– The recovery operation of the ashes will take place once a day line before beginning the day’s operation.

Composition of the refractory liner:
– The afterburner is equipped with access doors so as to ensure regular cleaning of dust;
– The Whole installation will conform to European standards (EU)
. Combustion
– The liner is made of refractory bricks and a thermal insulating material ensuring a minimum temperature of the sheet;
. Afterburner
– Thickness:                    110mm

Burner combustion:

– The combustion chamber is equipped with a burner to line to guarantee correct temperature for the total destruction of waste combustion;
– Nature:                    Refractory bricks with 42 alumina
Air fan:
? 1 to regulate the temperature of the combustion chamber
Fuel    diesel oil
– Operating temperature:             1650 ° C maximum
Afterburner

0.11 KW
1100 ° C
– There is a motor operated valve which controls the flow according to the combustion.
– Operating temperature:             1000 ° C maximum
– Regulators of fever with digital display:
* Insulation:
? The manual controls are provided on each item.

2.
– The electric power is 220V 50Hz single phase.
– Nature:                    Calcium Silicate
– The dimensions of the floor are equipped laterally primary air nozzles that fuel combustion;
Volume of combustion

room Combustion: 0.3 m3
‘ TEMPERATURES:
? Provide controlled guaranteeing the absence of color, cloud of smoke or burning odor;

Fan power    0.37 kW


Clover's Social Media